Wood Plastic Composite
+91 88007 71250

WPC BOARD PRICE GUIDE 18MM RATES THICKNESS AND DENSITY EXPLAINED

November 20, 2026

WPC BOARD PRICE GUIDE 18MM RATES THICKNESS AND DENSITY EXPLAINED

A carpenter in Gurugram fits a plywood vanity under a bathroom basin. Eighteen months later, the bottom panel has swollen, the laminate is peeling, and the client wants it redone at his cost. Ask any interior contractor in Delhi NCR, and you will hear a version of this story every month.

That is why more buyers now check the WPC board price before they finalize a kitchen, wardrobe, or bathroom unit. A board that does not soak up water or attract termites costs less over the life of the furniture, even when the first quote looks close to plywood.

This guide explains what drives the WPC board price, what to expect for 18mm boards, how to read a thickness chart, why density matters, and how to choose the right board for each job.

What Is a WPC Board?

A WPC (Wood Polymer Composite) board is made from wood fibre or wood flour bonded with a thermoplastic polymer and pressed into flat sheets. Most WPC sheets used in interiors are WPC foam boards: a cellular core with a denser, smooth outer skin.

It looks and works like a wooden board but behaves like plastic around water. It does not rot, swell or feed termites, and carpenters can cut, nail, screw, and laminate it with their usual tools.

What Decides the WPC Board Price?

Two boards of the same thickness can carry very different price tags. These factors move the WPC board price up or down:

  • Thickness: more material means a higher price per sheet.

  • Density: a denser board uses more raw material and holds screws better, so it costs more.

  • Raw material quality: good polymer and fine wood flour give a stronger, more even board than cheap filler.

  • Surface finish: plain, sanded, and pre-laminated boards are priced differently.

  • Order volume: manufacturers and dealers usually offer better rates on bulk orders.

  • Freight: distance from the plant changes the final landed cost.

Tip: compare quotes only at the same thickness, density, and size. A cheaper board is often just a lighter one.

WPC Board 18 mm Price in India

The 18 mm board is the most common choice for kitchen cabinets, wardrobes, and vanities because it matches the thickness carpenters already use with plywood. That is why the WPC board 18 mm price is the first figure most buyers ask for.

Rates for 18 mm boards move with raw material costs, density, and order size, so a printed price list goes out of date quickly. For today's rate on your quantity, call or WhatsApp Floresta on +91 88007 71250.

WPC Board Price per Sq Ft vs. per Sheet

Suppliers quote in two ways. A per-sheet rate is simple when you buy whole boards. The WPC board price per sq ft is better for comparing brands, because sheet sizes can differ.

For an 8 ft x 4 ft sheet (32 sq ft), divide the sheet rate by 32 to get the per sq ft figure. Before you compare 18mm quotes from two suppliers, confirm both quotes are for the same density and finish.

WPC Board Thickness Chart

Choosing the right WPC board thickness avoids both overspending and weak furniture. Thickness is also the biggest single driver of the WPC board price. Use this chart of common WPC board uses by thickness as a starting point.

WPC board thickness

Typical uses

6–8 mm

Back panels, wall panelling, false ceilings, light partitions

12 mm

Drawer bottoms, back panels, light-duty shutters

15–16 mm

Cabinet shutters, small shelves, light furniture

18 mm

Kitchen and wardrobe carcasses, vanity units, shelves

19 mm

Wide shelves, heavy-use furniture, table tops

24–25 mm

Door shutters, counter bases, heavy-load units

Not sure which thickness fits your design? Share your drawing with Floresta, and we will suggest the right board.

WPC Board 12 mm vs. 18 mm vs. 19 mm

A WPC board 12 mm sheet suits light parts such as drawer bottoms and back panels. For carcasses and shelves that carry weight, choose 18mm.

A WPC board 19 mm sheet adds a little extra stiffness for wide shelves and furniture that takes a daily load. If you are unsure, ask the supplier which thickness they recommend for the span you are building.

Why WPC Board Density Matters

Density tells you how much material is packed into the board. It is usually given in g/cm³ or kg/m³, and it is the best quality signal that most buyers ignore.

A higher WPC board density gives you:

  • Stronger screw and nail holding

  • Less sagging on long shelves

  • Cleaner edges when you drill or route

  • A smoother base for laminate

A low-density board is lighter and cheaper, but its edges can crumble and screws can loosen over time. It is also the main reason the WPC board price differs so much between brands. Ask every supplier to state density in writing next to the thickness.

When you ask Floresta for a quote, ask for the density too, and compare every supplier like for like.

WPC Board Size

The standard WPC board size in India is 8 ft x 4 ft (2440 mm x 1220 mm), the same as plywood. Carpenters can plan cuts on a WPC sheet exactly as they do on plywood, and you can compare the WPC board price per sheet directly with your current plywood rate.

For full size and thickness details, see the Floresta WPC brochure.

WPC Board vs Plywood vs Solid Wood

Feature

WPC board

Plywood

Solid wood

Water

Waterproof

Depends on grade; edges can soak up water.

Absorbs water; can swell or crack

Termites and borers

Termite- and borer-proof

Needs chemical treatment

At risk unless treated

Warping and swelling

Stays stable in damp areas

Can swell or delaminate

Can warp with humidity

Maintenance

Wipe clean; no polish needed.

Edge sealing and laminate care

Polish and regular treatment

Fire

Fire retardant

Depends on grade

Combustible

Working

Nailable, screwable, and cuts with standard tools

Easy to work

Needs skilled work

Eco profile

Eco-friendly; less need for fresh timber

Uses timber veneers

Uses felled timber

For dry bedroom furniture, plywood still does the job. For anything near water, a WPC board usually lasts longer (see why WPC beats wood and plywood), so the real cost of ownership is lower even when the WPC board price is close to or a little above plywood.

Where to Use WPC Boards: Real-Life Examples

  • Kitchen sink unit: leaks and mopping water hit the bottom panel first. A waterproof board like WPC will not swell.

  • Bathroom vanity: daily splashes and steam cause most plywood vanities to fail early.

  • Balcony storage and shoe racks: rain spray and humid air are no problem.

  • Ground-floor homes in termite-prone areas: WPC gives termites and borers nothing to eat.

  • Offices, clinics, and schools: furniture that is wet-mopped every day.

  • Doors and frames: bathrooms and kitchens where wooden frames rot at the base.

  • Pre-fabricated houses and site offices: quick to build and weather-ready.

See more project ideas on our WPC applications page.

Installation Tips

  • Cut with a carbide-tipped blade for clean, chip-free edges.

  • Pre-drill pilot holes close to edges to avoid cracking.

  • Use screws, not just nails, for joints that carry load.

  • Laminate with an adhesive suited to WPC; ask your supplier which one they recommend.

  • Edge-band exposed edges for a neat finish.

  • Leave a small gap where panels meet walls in rooms with big temperature swings.

Maintenance Tips

  • Clean with a damp cloth and mild soap.

  • No polish, varnish, or anti-termite treatment is needed.

  • Do not place hot cookware directly on the board.

  • Check and tighten hinges after the first few months, as with any furniture.

Buying Guide: How to Compare WPC Board Price and Quality

A low WPC board price means little if the board fails in a year. Use this checklist before you place an order:

  1. Ask for density in writing, not just thickness.

  2. Measure thickness with a vernier caliper at a few points.

  3. Look at a cut edge. The cells should be even, with no large holes.

  4. Drive a screw near the edge and check that it holds firm.

  5. Lay the WPC sheet flat and check for bowing.

  6. Ask for test reports for water, termite, and fire resistance, and check any standard quoted on the Bureau of Indian Standards website.

  7. Compare the landed price per sq ft, including freight.

  8. Buy directly from WPC board manufacturers in India or their authorized dealers, so you get genuine material and clear after-sales support.

Why Choose Floresta WPC Boards

Floresta is a brand of TVL Engineers Pvt. Ltd., one of the WPC board manufacturers in India serving furniture makers, carpenters, interior designers, builders, and dealers. Our corporate office is in Kirti Nagar, New Delhi, and our plant is in Pantnagar, Rudrapur, Uttarakhand.

  • European technology for consistent quality

  • Termite- and borer-proof, with no chemical treatment needed

  • Waterproof and moisture-proof for kitchens, bathrooms, and balconies

  • Fire retardant for safer interiors

  • Eco-friendly, reducing the need for fresh timber

  • Nailable and screwable with standard carpentry tools

  • Quality-tested and dimensionally accurate WPC sheets

  • Direct from the factory, so you get a fair WPC board price with dealer and bulk supply across India

Learn more about Floresta and TVL Engineers, or download the Floresta WPC product brochure (PDF) for full specifications.

Frequently Asked Questions

1. What is the WPC board price in India?

The WPC board price in India depends on thickness, density, finish, order size, and freight. Thicker and denser boards cost more per sheet. For an exact rate on your size and quantity, call Floresta on +91 88007 71250 or email info@floresta.in.

2. What is the WPC board 18 mm price per sheet?

The WPC board 18 mm price per sheet changes with density, surface finish, and the quantity you order. Call Floresta for today's rate. To compare suppliers fairly, convert every quote to price per sq ft and make sure each quote is for the same density and an 8 ft x 4 ft size.

3. Which WPC board thickness is best for kitchen cabinets?

For kitchen cabinet carcasses, an 18mm WPC board is the usual choice because it carries load well and matches standard hardware. Use 12mm for back panels and drawer bottoms. For wide shelves or heavy loads, 19mm or thicker boards give extra stiffness and reduce the chance of sagging.

4. What is a good WPC board density?

A good WPC board density is high enough to hold screws firmly and resist sagging on shelves. Lighter, low-density boards are cheaper but weaker at the edges. Higher density also gives a smoother base for laminate. Always ask suppliers to confirm density in writing along with thickness before you buy.

5. Is WPC board better than plywood?

WPC board is better than plywood in wet and termite-prone areas such as kitchens, bathrooms and balconies. It does not swell, rot or need anti-termite treatment. Plywood still works well in dry rooms. Compare the long-term cost, including repairs and replacements, not just the first price.

6. Are WPC sheets waterproof and termite-proof?

Yes. Good-quality WPC sheets are waterproof and termite and borer-proof because the polymer in the board does not absorb water and gives insects nothing to feed on. This makes them suitable for sink units, bathroom vanities and ground-floor homes. Floresta boards are also fire-retardant and moisture-proof.

7. Can WPC boards be screwed, nailed, and laminated?

Yes. WPC boards are nailable and screwable and can be cut with standard carpentry tools. Pre-drill holes near edges for the best grip. You can apply laminate, veneer, or paint using an adhesive suited to WPC. Edge-banding gives exposed edges a clean, finished look.

Conclusion: Get the Best WPC Board Price for Your Project

The best WPC board price is the one that gets you the right thickness and density for the job, with no callbacks for swollen or termite-damaged furniture. For most kitchen, wardrobe and vanity carcasses, a high-density 18mm board is the safe choice.

Floresta WPC boards are waterproof, termite and borer-proof, fire-retardant, fire retardant and eco-friendly, and made with European technology at our plant in Uttarakhand. Whether you are a carpenter, interior designer, builder or dealer, we will help you choose the right board and give you a clear quote.

Get your quote today

  • Call or WhatsApp: +91 88007 71250

  • Email: info@floresta.in